FABRIC, INTERFACING & STABILIZERS

EXTERIOR FABRIC
1/2 yard (50 cm) Approx. +  3” W (8 cm) x 55” L (140 cm) for crossbody strap, if making yours into a crossbody

LINING FABRIC
1/2 yard (50 cm) Approx.

INTERFACING
1/2 – 1 yard (50 - 100 cm) Approx. Lightweight woven fusible interfacing (Sew Woven or Pellon ShapeFlex SF101) * Woven interfacing not required when using vinyl/cork/waterproof canvas.

STABILIZER
Approx. 9” x 16” (22.8 – 40.6 cm) light weight stabilizer such as Decovil Light

HARDWARE & SUPPLIES

9.5" (24.1 cm) #5 zipper tape for main zipper closure + (1 Zipper Pull)

7.5" (19 cm) #5 zipper tape for back exterior pocket + (1 Zipper Pull) – Not required for crossbody purse option

(1) Magnetic Snap or Turn Lock

(1) 3/4" (20 mm) Snap Hook

(2) 12 or 13.5 mm approx. (inner diameter) Grommets Note: Screw back grommets not recommended -  Grommets not required for crossbody purse option

(1) 28mm approx. (inner diameter) Gate Ring – Not required for crossbody purse option

1 Rivet (or Chicago Screws)
• 6-7mm for thinner fabrics or
• 8-9mm for thicker fabrics

ADDITIONAL HARDWARE FOR CROSSBODY PURSE OPTION

(4-6) additional Rivets (or Chicago Screws)

(1) additional 3/4" (20 mm)  Snap Hook

(2) 3/4" (20 mm) D-Rings

(1) 3/4" (20 mm) Strap Slider

OTHER SUPPLIES

Bag Tag (optional)

Double-sided tape

Rotary cutter, Scissors, Thread Nippers
Air erasable marking pen

Grid Ruler & Cutting Mat

Rivet Setter Tool or Rivet Press & Dies
Hallow Punch Cutter  (optional) – for cutting out hole for Grommets or an Exacto Knife

Leather Hole Punch